Detection range 1) Potential: -2000 to 2000 mV
2) pH: -20.00 to 20.00 pH
3) Temperature: 0 to 100 °C
Titration mode Auto titration, Auto intermit, Intermit, Stat
Number of methods Up to 20
Titration Potentiometric (acid-base titration / redox titration / precipitation titration) /Photometric / Polarization / Conductometric
Titration form EP stop method, Level stop method, Full
Special application Measurement of electrode potential (pH, potential), Acid dissociation constant (pKa)
Display White LED-backlit LCD
On-screen display 1) Potential, titration volume / Measurement result / Titration conditions /Parameters
2) Japanese / English / Mandarin Chinese / Korean
Calculation Concentration / Statistics (mean, SD, RSD) / Auto input of blank and factor
Data memory 50 samples
GLP support Registration of operator / Record of calibration results / Record of calibration of electrode / Verification of burette capacity
Burette capacity 20mL glass burette (standard) Optional 10mL and 5mL burette units available
Burette accuracy 20mL burette: ±0.02mL, repeatability ±0.01mL, 10mL burette: ±0.015mL, repeatability ±0.005mL, 5mL burette: ±0.01mL, repeatability ±0.003mL
Preamplifier 1) STD: for pH (mV) and mV (standard)
2) PTA: Optional amplifier for photometric titration
(factory setting required)
3) POT: Optional amplifier for polarization titration
(factory setting required)
4) CMT: Optional amplifier for conductometric titration
(factory setting required)
External I/O RS-232C x 2: for dot matrix printer, electronic balance, Data Capture
Software (SOFT-CAP)
USB x 1: for USB flash drive, thermal printer, keyboard, barcode reader, foot switch
SS-BUS x 1: for multiple sample changer, APB, peristaltic pump
Expandability Input terminal for temperature sensor to correct reagent volume, sensor Pt100,temperature reading accuracy: ±0.5°C (burette 1 only)
Automatic piston burette: Up to 10 (incl. two built-in burettes) Multiple Sample Changer: CHA-700
Ambient conditions 1) Temperature: 5 to 35°C
2) Humidity: 85%RH or below (no condensation)
Power supply 1) Voltage: 100 to 240V ±10% 50Hz/60Hz
2) Power consumption: approx. 20W
Dimensions 141 (W) x 296 (D) x 383 (H) mm (not incl. tubing) 5.55 (W) x 11.65 (D) x 15.08 (H) in
Weight Approx. 4kg (8.82 lbs)
* Electrodes and electrode cables not included. Available as an option.
