MKC-710 Titrator

Coulometric Entry Level KF Titrator MKC-710B

Compact size, easy operation, low cost: The MKC-710B Karl Fischer Titrator is a compact, cost-effective solution for highly accurate water content determinations in products which contain small amounts of water. This model provides an extremely

Product Description

Compact size, easy operation, low cost: The MKC-710B Karl Fischer Titrator is a compact, cost-effective solution for highly accurate water content determinations in products which contain small amounts of water. This model provides an extremely simple user guidance, a new comfortable approach for method development and editing and easy data exchange possibilities.

But there is much more: The MKC-710B can grow with your needs: By adding an MCU-710M colour touch screen control unit it can easily be upgraded to a powerful multi channel titration system, capable of running up to 4 titrations of any type (Karl Fischer volumetric, Karl Fischer coulometric or potentiometric titration) simultaneously.

Smooth method input and method transfer
The MKC-710B titrator offers a comfortable way to edit methods – without requiring a touch screen on the instrument itself: The methods are developed and stored on an USB memory stick by means of a personal computer and can easily be installed on one or several MKC-710B Titrators.

Fast measurements
A new acceleration amplifier provides faster electrolysis with a maximum electrolytic speed of 2.6 mg H2O/min. This shortens the time required for pre-titrations and sample measurements considerably.

Suitable for sticky samples
Easy maintenance when measuring samples which tend to contaminate the diaphragm as eg. oils: The MKC-710B can be equipped with a titration cell with a replaceable ceramic diaphragm.

Details

Applications

Technical Specifications

Software

The easy way to transfer your results directly to Microsoft EXCEL

The Data Capture Software is an easy to use and flexible solution to collect measurement results from different KEM instruments (Refractometers, Density Meters, Potentiometric or Karl-Fischer Titrators, Thermal Conductivity Meters) on a Windows personal computer.

  • Up to four different instruments can be connected to one single PC and be used simultaneously. Two of these instruments can be of the same model.
  • The results can directly be stored in EXCEL workbooks. The measured results are always available at a glance in a clear and concise manner.
    • As soon as a measurement has finished, the result appears in the corresponding worksheet.
    • The layout, order and the format how the results are stored in EXCEL can freely be adapted to specific needs.
    • Results can be automatically be processed by EXCEL macros as they are transmitted to the PC. Additional data (comments, sample data, etc.) can be entered at any time by means of the PC keyboard or a barcode reader.
  • All results can at the same time be stored in as CSV files.

System Requirements for PC

Specification Description
Computer Personal computer with Pentium II CPU of 233MHz or better
Operating system Microsoft Windows 2000, XP,
Vista (Home Basic, Business), 7 (Home Premium, Professional)
Other programs Microsoft EXCEL 97 / 2000 / 2003 / 2007
RAM at least 128 MB / 512 MB recommended
Hard disc space 10 MB required for installation
Display Resolution higher than 640 * 480
Disk drive CD-ROM or DVD-ROM
Interface 1 USB port
RS-232C D-sub (male) 9 pin required for each additional instrument
to be connected to the same computer.

Accessories

Printer

IDP-100 PrinterIDP-100 Printer
Dot matrix ink printer for GLP compliance.

  • Dot matrix printer with ink ribbon, prints on regular paper (width 57.5 ± 0.5mm).
  • 24 digits, 144 dots per line.
  • Automatic paper end detection – no loss of data!
  • 2 kB internal buffer memory. Advantage: Less time required per measurement, as the instrument does not have to wait until the results are printed out.

Solvent Pump

Automatic Solvent Pump - Automatic Filling and Emptying System for Titration CellAutomatic filling and emptying system for titration cell
Direct contact with Karl Fischer Reagents should always be avoided. This automatic filling an emptying system for the titration cell (ordering number 98-433-0135) protects operators from direct contact with toxic reagents and vapors. The pump is built into the magnetic stirrer. The connecting cable for the stirrer is included in the standard delivery.

Titration Cells

Sketch Part Code Description
Coulometric Karl Fischer Cell 4200 20-040-4200-48 Transparent cell with drain cock (glass cell only)
Coulometric Karl Fischer Cell 7300 12-006-7300-48 Transparent cell, complete, including generator electrode without diaphragm, twin Pt electrode, washing bottle, funnel, KF grease, septum (10 pcs.) and anode  adjuster
Coulometric Karl Fischer Cell 7400 12-006-7400-48 Transparent cell, complete, including generator electrode with diaphragm, twin Pt electrode, washing bottle, funnel, KF grease, septum (10 pcs.) and anode  adjuster
Coulometric Karl Fischer Cell 6200 12-006-6200-48 Transparent cell, including generator electrode without diaphragm and twin Pt electrode
Coulometric Karl Fischer Cell 6100 12-006-6100-48 Transparent cell, including generator electrode with diaphragm and twin Pt electrode
Coulometric Karl Fischer Cell 6300 12-006-6300-48 Transparent cell with drain cock, including generator electrode without diaphragm and twin Pt electrode
Coulometric Karl Fischer Cell 6400 12-006-6400-48 Transparent cell with drain cock, including generator electrode with diaphragm and twin Pt electrode
Jump To:
Enquire on the
Coulometric Entry Level KF Titrator MKC-710B