THE SAFE SIDE OF FLASH POINT TESTING
Eraflash combines maximum safety with highest performance
ASTM D7094 accepted in many fuel specs due to no statistical bias to ASTM D93
ERAFLASH Flash Point Tester (EF10)
THE SAFE SIDE OF FLASH POINT TESTING Eraflash combines maximum safety with highest performance ASTM D7094 accepted in many fuel specs due to no statistical bias to ASTM D93
Product Description
Details
Applications
Technical Specifications
Details
Applications
Technical Specifications
Details
No Open Flame, No Glowing Wire, No Fire Hazard
The innovative Continuously Closed Cup Flash Point (CCCFP) methods ASTM D6450 and D7094 use only 1–2 mL of sample that is sealed in a closed chamber during the whole measurement process. An electrical arc inside the chamber ignites the sample and the lack of oxygen extinguishes the flame automatically. The device measures the corresponding pressure increase inside the chamber. An increase of ≥ 20 kPa is defined as the flash point.
High Speed
eralytics’ patented PBT – Peltier Boost TechnologyTM allows previously unmatched heating and cooling rates. A sophisticated mechanism safeguards the Peltier elements from high temperatures during heat-up and allows their use during cooldown even at temperatures that would normally harm them. This cleverly designed temperature control system allows turnaround times that are significantly shorter than those offered by all other flash point instruments available on the market.
Unmatched Range
PBT also facilitates the widest measurement range on the market within a single device. The powerful Peltiers reach -25 °C and the safeguard mechanism efficiently shields them
from temperatures up to 420 °C. The low temperature model ERAFLASH LT even reaches -40 °C oven temperature at significantly faster cooling rates than ever before.
Applications
ERAFLASH is the flash point testing solution for a wide variety of industries. It is used for specifying fuels, analyzing fresh and used lubricating oils, and bitumen testing. The small sample volume also renders it ideal for the more expensive samples such as flavors & fragrances, cosmetics, paints and varnishes or even hazardous waste.
Technical Specifications
| Specification | |||
|---|---|---|---|
| Available Test Methods | ASTM D6450/SHT0768, D7094, IP620 US D.O.T, RCRA, NAVY, NATO approved |
||
| Pre-programmed Correlation Methods |
Pensky Martens Closed Cup: ASTM D93; D8175; EN ISO 2719; DIN 51758; IP34; JIS K2265 TAG Closed Cup: ASTM D56 Abel Pensky Closed Cup: ISO 13736; IP170 Small Scale Closed Cup and Flash / No Flash methods: ASTM D3828; EN ISO 3679, EN ISO 3680 |
||
| Fuel Specifications | (ASTM D7094) ASTM D396, D975, D2880, D3699, D7467 | ||
| Speed Tests | Fast screening test programs for unknown samples | ||
| PBT – Peltier Boost TechnologyTM | High speed heating and cooling: -25 °C–420 °C (-13 °F–788 °F) with a single analyzer | ||
| CPT – Contamination Prevention TechnologyTM |
Advanced electrode protection and self-cleaning ignition system to minimize cleaning and maintenance. | ||
| Combustion GraphicsTM | Display of combustion characteristics for contamination analysis | ||
| QC Mode | Built-in quality control mode including on-screen QC charts | ||
| QuickCalTM | Temperature calibration cup for fast on-site calibration | ||
| Fuel Dilution Program | Automatic fuel dilution measurement for the analysis of used engine oils | ||
| Temperature Range | ERAFLASH 0 °C to 200 °C (32 °F to 390 °F) stand alone down to -25 °C (-13 °F) with external cooling up to 420 °C (788 °F) with optional High Temperature Module ERAFLASH LT -15 °C to 120 °C (5 °F to 248 °F) stand alone down to -40 °C (-40 °F) with external cooling |
||
| Temperature Stability | 0.1 °C (0.2 °F) | ||
| Sample Throughput | Up to 12 samples per hour | ||
| Sample Volume | 1 mL (ASTM D6450), 2 mL (ASTM D7094) | ||
| Interfaces | Built-in PC with Ethernet, USB and RS232 interfaces; Wifi via USB dongle Direct LIMS connectivity via LAN and output to printer or PC Optional input by external keyboard, mouse and barcode reader |
||
| Remote Control | Remote service capability via Ethernet interface | ||
| PC Software | ERASOFT RCS – remote control Windows® software for multi-instrument remote control, convenient data transfer and result analysis | ||
| Power Requirements | Auto-switching 85–264 V AC, 47–63 Hz, max. 150 W (multi-voltage power supply) Field application: 12 V DC (vehicle battery) adapter available |
||
| Dimensions / Weight | 24 x 35 x 34 (9.5 x 13.8 x 13.4 in) / 9.7 kg (21.4 lb) | ||
Jump To:
Enquire on the
ERAFLASH Flash Point Tester (EF10)
